DIY GUTTER

Are you a DIY person? Are you the type of person that would rather do it yourself instead of paying a person to do the work for you? Have you ever tried to buy all the gutter material you need from the local big box store and later found out that you do not have all the material to do the job right? If so, then we have the gutter solution you are looking for. Rain Guard is now offering complete gutter kits with everything you need to install a professional gutter job. Our kits include all the hangers, screws, sealer, and gutter supplies needed to complete the job at a fraction of the price for new professionally installed gutter.

What separates Rain Guard from the big box stores is the attention to detail. Every kit includes written instructions that will guide you from start to finish. We show you how to attach the hangers to the gutter, how to pitch the gutter so it drains correctly, and how to attach the gutter to your house to name a few. The complete gutter kit has everything you need to install a professional gutter. For those who need extra help, Rain Guard can also provide an additional level of service by coming by your jobsite and offering hands on demonstrations to ensure a quality installation.

  

All that is needed for Rain Guard to get your order ready to be picked up or delivered is a diagram with the correct measurements and downspout locations. The measurements on the diagram need to be as accurate as possible. If the measurements are not accurate the gutter will have to be adjusted at the jobsite in order to be installed properly. The sections of gutter come in 15-20' lengths meaning there are less seams and less chances for the gutter to leak. Each complete gutter kit comes with everything you need such as:

• Gutter (15'-20' lengths; any color)                 $1.15/ft
• Downspout (2x3 or 3x4)                                $1.45/ft- $1.75/ft
• Downspout Straps (2x3 or 3x4)                    $1.50/each
• Elbows (2x3 or 3x4)                                       $2.20- $2.85/each
• Hidden Hangers (5" and 6")                         $0.45- $.65/each
• Endcaps (5" and 6")                                      $2.45/each
• Screws (gutter screws and downspout screws)**rivets are available upon request for downspouts**    $3.50/pack of 30
• Sealer (for endcaps and corners)                $7.00/tube
• Strip Miters (for inside or outside corners) $8.00/each
• Touch Up Paint (included upon request)     $12.00/each
• Written Instructions 

Tools needed: Drill, 1/4" screw bit, hammer, tin snips, needle nose pliers,           caulking gun

**Rain Guard custom fabricates the gutter to match the dimensions given. Since these can not be reused once made, no refunds will be given.**

 

how to submit a diy order form to rain guard

1. Fax or email a diagram of the building with the correct measurements for each section of gutter and downspout needed. Be as accurate as possible. If pictures are available send them as well.

2. On the diagram put an "X" where the downspouts go and an arrow to indicate which direction the water should flow.

3. Indicate what color to use and what size gutter and downspout to use.

4. Indicate the type of fascia on your house. (Does it have a 1x2 trim board, Is it slanted, Is it flat, Is there a fascia cover, etc). This will help us figure out which hidden hanger to provide.

5. Let us know if you need the material delivered or if you will be picking up the material at our shop. Delivery fees will be added to all deliveries.

With the information provided above, Rain Guard can give you an accurate cost of material. Rain Guard will not process any orders until a written estimate has been signed by the purchaser and agreed upon. The delivery charges vary based on location of final destination and  size of order. If you would like to speak with a knowledgeable sales representative please call the office at 918-299-0419 or email questions to sales@rainguard-tulsa.com